HD 500

The HD500 is an economical solution for the most demanding GMAW and Flux Cored arc welding applications.
Rated 500 Amp at 50% duty cycle (363 Amp at 100%) the “Heavy Duty” HD500 provides high quality welding performance from thin sheet metal to thick plate.

Technical Information

Description

SIMPLE CONTROL PANEL PROVIDES ADVANCED FUNCTIONALITY
Wire Diameter – Gas & Wire Type Switch

  • Presets idea fixed conditions to ensure a good arc start, arc end, and spatter control Digital Amperage & Voltage Meters Crater Fill Function
  • Adjust output to easily fill the crater at the weld end
  • Controls initial condition when selected (internal dip switch)
  • Provides cruise control Synergic (One-knob) Control
  • Combines wire feed speed (Amperage) and arc voltage to easily go from thin sheet to thick plate welding by adjustingonly one knob – ideal for less experienced operators Penetration Control
  • Ideal for less experienced operators Penetration Control
  • Delivers uniform penetration even when tip-to-work distance varies Gas Check Switch
  • Activates gas flow to pre-set flow rate with no machine out-put to avoid wasting welding wire Warning Lamp (Error Detection)
  • Fully illuminates or flickers depending upon error type
  • Trouble shooting guide identifies errors
  • Ideal for use with mild steel and stainless steel wires – solid or flux cored
  • Very stable arc with 100% CO2 or Argon / CO2 mixtures on mild steel
  • Positive output terminals for high and low inductance helps minimize spatter in any output range
  • Built-in running gear with cylinder rack and steering handle
  • Standard 15 ft. remote pendant provides wire feed speed, arc voltage, and wire inching control at the work area
  • Pre-wired 7 ft. primary input power cable
  • Wire slow-down on / off switch for improved arc starts
  • On / off switch for Fan-on-demand for power saving or extended cooling
  • Light weight wire feeder with control circuits built-in the power source for durability

Espeficicaciones

Espeficicaciones

Specification Value
Number of phases 3
Rated frequency 50 / 60Hz
Rated input voltage 230V: 460V
Input voltage range 207-253V: 414-506V
Rated input power 31.5kVA (28kW)
Rated input current 79.1A: 39.5A
Rated output current 500A
Rated load voltage 45V
Rated output current range 50-500A
Rated output voltage range 15-45V
Maximum no-load voltage 65V
Rated duty cycle 50%
Number of welding conditions
Operating temperature range 14º F a 104º F (-10 a + 40º C)
Operating humidity range
Storage temperature range
Storage humidity range
Dimensions (W x D x H) 16.1 «x 26.0» x 37.2 «(408 mm x 660 mm x 945 mm)
Mass 364 lbs (165,0 kg)
en_US
Scroll to Top