Production cuts up to 2 inch thick material (including Aluminum)
Maximum cut up to 2-1/2 inch
Water cooled – 100% duty cycle
Built-in water circulator extends torch and consumable life
Faster, safer and more economical than oxy-fuel
on 1″ carbon steel
Superior gouging capabilities
I/O receptacle for automated cutting
time of tip and electrode)
tiempo de reemplazo de punta y electrodo)
Wide operation area (Up to 100 ft. torch option)
Advanced safety protection circuits
Fully variable output
Cruise control
Pulsed pilot arc start reduces electrode wear
Diagnostic indications for troubleshooting
Wheels provided for greater maneuverability
D12000 Air Cutting Plasma System
Welding machinesCapable of clean cutting nearly 2-inch carbon steel and aluminum alloys, the D-12000 is a safe and economical alternative to Oxy-fuel cutting. It offers more unique, user-friendly features than any machine in its class.
Upon turning on the power source a self-diagnosis function takes place that will not allow the system to operate if an abnormal condition exist. Indicator lamps
identify operational problems. Alarms will sound when unsafe conditions happen such as removing torch consumables with control power on.
Our patented “TORCH GUARD” feature monitors electrode consumption and indicates replacement time avoiding torch head damage from over use of the
electrode.
Description
Specifications
Specifications
Specification |
Value |
---|---|
Number of phases | 3 |
Rated frequency | 50 / 60Hz |
Rated input voltage | 230 / 460V |
Input voltage range | 230 / 460V ± 10% |
Rated input power | 28,3kW |
Rated input current | |
Rated output current | 120A |
Rated load voltage | |
Rated output current range | 30 – 120A |
Rated output voltage range | |
Maximum no-load voltage | |
Rated duty cycle | 100% |
Number of welding conditions | |
Operating temperature range | |
Operating humidity range | |
Storage temperature range | |
Storage humidity range | |
Dimensions (W x D x H) | 17.8 «x 30.7» x 32.4 «(453 mm x 780 mm x 823 mm) |
Mass | 384 lbs (174 kg) |
Rated input power for DC TIG scratch start | |
Rated output current for DC TIG scratch start | |
Rated load voltage for DC TIG scratch start | |
Rated output current range for DC TIG scratch start | |
Rated duty cycle for DC TIG scratch start | |
Rated input power for DC STICK scratch start | |
Rated output current for DC STICK scratch start | |
Rated load voltage for DC STICK scratch start | |
Rated output current range for DC STICK scratch start |